After you’ve made your circuit boards they need to be programmed! At a minimum you can program with the software that I’ve produced, or you might like to change things to suit your setup. This article walks you through the process.
The Low Cost BMS
The Low Cost BMS is an open-source design for a battery management system. You can build this BMS yourself to monitor cells within your homemade battery. It will take you some time to do, and you may have to learn a bit along the way, but it will be cheap!
The Selectronic SP PRO Inverter/Charger
How I’ve configured what is probably the most advanced and flexible battery inverter/charger on the market.
How I made my DIY Home Battery
This page describes my homemade home storage battery (DIY Powerwall). It is a grid-connect battery, it charges from my solar array and is built around some windfall lithium cells.
When Lithium falls off the back of a Bus
Introduction to my home battery